Hydrogel to generate voltage-领域趋势-仿生智能材料研究组  
Hydrogel to generate voltage 文献论文 柔性智能
lchaoxu 2018-11-23 1928

Progress towards the integration of technology into living organisms requires electrical power sources that are biocompatible, mechanically flexible, and able to harness the chemical energy available inside biological systems. Conventional batteries were not designed with these criteria in mind. The electric organ of the knifefish Electrophorus electricus (commonly known as the electric eel) is, however, an example of an electrical power source that operates within biological constraints while featuring power characteristics that include peak potential differences of 600 volts and currents of 1 ampere1,2. Here we introduce an electric-eel-inspired power concept that uses gradients of ions between miniature polyacrylamide hydrogel compartments bounded by a repeating sequence of cation- and anion-selective hydrogel membranes. The system uses a scalable stacking or folding geometry that generates 110 volts at open circuit or 27 milliwatts per square metre per gel cell upon simultaneous, self-registered mechanical contact activation of thousands of gel compartments in series while circumventing power dissipation before contact. Unlike typical batteries, these systems are soft, flexible, transparent, and potentially biocompatible. These characteristics suggest that artificial electric organs could be used to power next-generation implant materials such as pacemakers, implantable sensors, or prosthetic devices in hybrids of living and non-living systems。
研究人员使用3D生物打印机将凝胶液滴阵列沉积到塑料基材上,并用紫外光将其固化、转化为凝胶。我们将高盐度和低盐度交替的凝胶(红色和蓝色)打印到一个基底上,并将阳离子选择性和阴离子选择性交替的凝胶(绿色和黄色)打印在第二个基底上。当叠加时,这些凝胶就会连接形成612个四聚体凝胶细胞的导电通路,可产生高达110伏的电压。


作者:Nature自然科研
链接:http://www.vccoo.com/v/0r3287
来源:微口网
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。
研究人员使用3D生物打印机将凝胶液滴阵列沉积到塑料基材上,并用紫外光将其固化、转化为凝胶。我们将高盐度和低盐度交替的凝胶(红色和蓝色)打印到一个基底上,并将阳离子选择性和阴离子选择性交替的凝胶(绿色和黄色)打印在第二个基底上。当叠加时,这些凝胶就会连接形成612个四聚体凝胶细胞的导电通路,可产生高达110伏的电压。


作者:Nature自然科研
链接:http://www.vccoo.com/v/0r3287
来源:微口网
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。
研究人员使用3D生物打印机将凝胶液滴阵列沉积到塑料基材上,并用紫外光将其固化、转化为凝胶。我们将高盐度和低盐度交替的凝胶(红色和蓝色)打印到一个基底上,并将阳离子选择性和阴离子选择性交替的凝胶(绿色和黄色)打印在第二个基底上。当叠加时,这些凝胶就会连接形成612个四聚体凝胶细胞的导电通路,可产生高达110伏的电压。


作者:Nature自然科研
链接:http://www.vccoo.com/v/0r3287
来源:微口网
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。
研究人员使用3D生物打印机将凝胶液滴阵列沉积到塑料基材上,并用紫外光将其固化、转化为凝胶。我们将高盐度和低盐度交替的凝胶(红色和蓝色)打印到一个基底上,并将阳离子选择性和阴离子选择性交替的凝胶(绿色和黄色)打印在第二个基底上。当叠加时,这些凝胶就会连接形成612个四聚体凝胶细胞的导电通路,可产生高达110伏的电压。


作者:Nature自然科研
链接:http://www.vccoo.com/v/0r3287
来源:微口网
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。


选自:https://www.nature.com/articles/nature24670


最新回复 (0)
返回